Product ID:EUTECTRODE 4, 428862-01
MSDS Date:09/07/1995
FSC:3439
NIIN:00-056-3606
MSDS Number: CGDSG

EUTECTIC CORP

1515 BROOK DR
DOWNERS GROVE, IL 60515
US

Emergency Phone: 800-323-4845

Info Phone: 800-323-4845

Cage: 72271

EUTECTIC CORPORATION

DOWNERS GROVE, IL 60515 US

Telephone: 800-323-4845

Cage: 5N977

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

POTASSIUM SILICATE

CAS: 1312-76-1

OSHA PEL N/K

ACGIH TLV: N/K

CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 5-10%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 5-10%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 1-5%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

CALCIUM FLUORIDE (AS F)

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 (F) (MFR)

ACGIH TLV: 2.5 MG/M3 (F) (MFR)

CELLULOSE (PAPER FIBER)

CAS: 9004-34-6

RTECS: FJ5691460

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3

FELDSPAR

CAS: 68476-25-5

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

IRON OXIDE; (MAGNETITE)

CAS: 1309-38-2

RTECS: OM4800000

OSHA PEL 15 MG/M3 (FE) (MFR)

ACGIH TLV: 10 MG/M3 (FE) (MFR)

POTASSIUM TITANATE

CAS: 12030-97-6

OSHA PEL N/K

ACGIH TLV: N/K

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

DARK TO SEE WELD ZONE, THEN GO TO NEXT LIGHTER

RTECS: 9999999ZZ

CANNOT BE CLASSIFIED SIMPLY. COMPOSITION &

RTECS: 9999999ZZ

PROCESS, PROCS & ELECTRODES/OTHER CONSUMABLES USED.

RTECS: 9999999ZZ

FUME & GAS DECOMP PRODS GENERATED ARE DIFF IN

RTECS: 9999999ZZ

INCL OZONE, CARBON MONOXIDE, CARBON DIOXIDE,

RTECS: 9999999ZZ

GASES. FOR MORE SPECIFIC INFORMATION REGARDING

RTECS: 9999999ZZ

SIDEROSIS (IRON DEPOSITS IN LUNG). METAL

RTECS: 9999999ZZ

CMPDS DURING WELDING, HEATING, BRAZING,

RTECS: 9999999ZZ

SICKNESS INCL CHILLS, FEVER, HEAD & MUSC ACHE,

RTECS: 9999999ZZ

PAIN, NAUS & VOMIT. SYMPS USUALLY OCCUR W/IN SEVERAL

RTECS: 9999999ZZ

IMMEDIATELY IF ANY OF THESE SYMPTOMS DEVELOP AFTER

RTECS: 9999999ZZ

REGARDING HEALTH HAZARDS OF INDIVIDUAL INGREDIENTS

RTECS: 9999999ZZ

SPRAYING", PUBLISHED BY THE AMERICAN WELDING

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:FUMES CAN BE DANGEROUS TO YOUR
HLTH & OVEREXP CAN CAUSE LUNG DMG &/OR OTHER ORG DMG. EYE/SKIN
CONT:ARC RAYS & UV LIGHT CAN INJURE EYES & BURN SKIN. LIQS USED IN
FLUXES & CHEM AIDS MAY CAUSE IRRI T/POSS CHEM BURNS. ELEC SHOCK CAN
KILL.INGEST:DANGER! MAY BE HARMFUL/FATAL IF SWALLOWED. GEN WELDING
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:IARC MONOGRAPHS, VOL 49, PG 247,
1990:GRP 2B. NTP 7TH ANNUAL RPT ON CARCINS, 1994:ANTIC TO BE
CARCIN. (SUPP DATA)
Effects of Overexposure:HLTH HAZ:FUMES:FUMES, GASES & DUSTS CAN BE
DANGEROUS TO YOUR HLTH. CERTAIN MED STUDIES HAVE SUGGESTED THAT
LUNG DMG CAN RSLT FROM OVEREXP TO THESE FUMES. SHORT TERM OVEREXP
MAY RSLT IN DIZZ, NAUS, DRY NESS/IRRIT OF NOSE, THROAT/EYES.
EXCESSIVE OVEREXP MAY CAUSE BRONCH ASTHMA, LUNG FIBROSIS,
PNEUMOCONIOSIS/ (ING 19)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHAL:MOVE VICTIM TO FRESH AIR SOURCE. CONTACT MD & ADVISE ON
INGS LISTED. SKIN:THORO WASH HANDS/AFFECTED AREAS W/SOAP & WATER TO
REMOVE ALL RESIDUE. IF RASH/BURN DEVELOPS, CONSULT MD. EYES:THORO
FLUS H W/WATER FOR AT LEAST 15 MINUTES TO REMOVE ALL RESIDUE.
OBTAIN PROMPT MED ADVICE FOR FLUXES & CHEMICAL AIDS. ADVISE MD OF
INGS LISTED. INGEST:CALL MD &/OR LOCAL POIS CTL CTR. ADVISE OF INGS
LISTED.

Extinguishing Media:CO*2, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . TOXIC FUMES MAY BE PRODUCED. SEE HAZARDOUS
DECOMPOSITION PRODUCTS SECTION.
Unusual Fire/Explosion Hazard:GENRLY NONFLAMM:WELDING ARC, SPKS &
FLAMES CAN IGNITE COMBUSTS & FLAMMS. SOME FLUXES & CHEM AIDS MAY
GIVE OFF HYDROGEN CHLORIDE, PHOSGENE & CHLORINE (SUPP DATA)

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN WELDER TO KEEP HIS/HER FACE AWAY
FROM FUME/DUST PLUME. USE ADEQUATE VENTILATION TO KEEP BELOW
EXPOSURE LIMITS. HANDLE W/CARE.
Other Precautions:TRAIN WORKERS NOT TO TOUCH LIVE ELEC PARTS & TO
INSULATE THEMSELVES FROM WORK & ELEC GROUND. PLEASE READ &
UNDERSTAND PROD LBL INFO FOR PROPER PROCS & USE. SEE ANSI Z49.1,
"SFTY IN WELDING & CUTTING", & CHAPTER 11 OF "THERMAL (ING 25)

Respiratory Protection:IF WORK STATION IS NOT PROPERLY VENTILATED TO
EXHAUST ALL FUMES, VAPORS & DUSTS BELOW RECOMMENDED EXPOSURE
LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GENERAL VENT & LOCAL EXHAUST AT WORK SITE TO
KEEP ALL FUMES & DUSTS FROM WORKER'S BREATHING ZONE & GEN AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS &(SUPDAT)
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
SHOWER . WEAR HAND, HEAD & BODY PROT; THIS MAY INCL ARM
PROTECTORS,(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:GASES. CANS UNDER PRESS & FLAMMS MAY EXPLODE. EXPLAN OF
CARCIN:ANIMAL:LUNGS, NASAL CAVITIES. OTHER PROT EQUIP:APRONS, HATS
AS WELL AS DARK, PROT CLTHG. EYE PROT:FULL LGTH FSHLD , W/APP ROP
FILTER LENS. PROVIDE PROT SCREENS &FLASH GOGGS IF NEC, TO SHIELD
OTHERS. AS RULE, START W/SHADE THAT IS TOO(ING 13)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES, GASES & DUSTS GIVEN OFF DURING
HEATING, WELDING, BRAZING, SOLDERING, CUTTING/THERMAL SPRAY
PROCESSES (ING 14)

Waste Disposal Methods:DISP OF WASTE MATL, POWDERS, GRINDING/FILTER
RESIDUES IN AN ENVIRONMENTALLY SENSITIVE MANNER I/A/W FED, STATE &
LOC REGS. USE APPROP MEASURES TO KEEP AIRBORNE DUST LEVELS CNTND
I/A/W EXPOS LEVELS. SEE GEN HAZ SUMMARY SECTION FOR SAFE HNDLG&
STORAGE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.